Veneer Edge Band

Materials: Veneer
Thickness: 0.3mm-3.0mm width: 15mm-650mm
Color series: Poplar Eucalyptus Pine Hardwood
Surface: matt, high glossy,smooth, embossed, or asdesigned.
Feature: Scratches Resistance,water Resistance,Glossy, beauty,light, stability, Durability
Package: rolls in cartons, 100meter/roll,or 200meter/roll

inquiry

jalon@foresmate.com

Send Request

The form has been submitted successfully!

There has been some error while submitting the form. Please verify all form fields again.

Elevate Furniture Elegance with Veneer Edge Banding

Veneer Edge Band is the ideal complement to veneered edges and panels. The sheets are carefully connected from real wood to make a continuous roll of ready-to-use trim. We have a variety of common species and can special order any unusual species on the market.

Veneer Edge Band is a thin veneer strip with adhesive on one side that covers the raw and exposed sides of particleboard and plywood. In other circumstances, edge banding is solid wood (typically scraps) that is glued or grooved into the piece of wood that it needs to fit. These bands can be created to match the colour of the wood to which they are attached. Edge banding, when done correctly, makes the entire board appear to be a solid piece of wood.

However, there is one (barely) noticeable aspect of Veneer Edge Band that your house guests are unlikely to see unless they study your furniture with a magnifying glass. Wood had three types of grain: edge, end, and face. Each of these grains runs in a distinct direction, which distinguishes the various varieties.

When utilising Veneer Edge Band, however, edge grain appears where end grain would ordinarily appear. The difference in grain is not so obvious to the untrained — or even the trained — eye that it becomes the main point of a piece. Not to mention that veneer edge band, regardless of grain orientation, is a considerably more appealing appearance than the raw or exposed edges it covers.

The adoption of veneer edge band is motivated by two factors: durability and attractiveness.Unfinished edges of plywood and particle board are more easily damaged.veneer edge banding reinforces the sides of the object it is bonded to, allowing it to withstand wear and tear better than raw wood and protecting it from the weather.You might not believe the inside of a cabinet takes as much wear as, say, a tabletop, but moving pieces in and out of a cabinet or altering shelf heights on a regular basis might have a greater impact on the quality of the piece than you realise.Veneer edge banding is far more resistant to normal bumps, scratches, and knocks than naked edges.

However, the most common reason woodworkers and DIYers use edge banding is for aesthetic reasons.Whether or not you can see the exposed edge of the plywood you’re working with, it’s critical that the colour and texture on all sides match.It takes away a project’s “homemade” appearance while adding gloss and sophistication to an otherwise inexpensive piece of wood.

Edge band made of wood veneer. Thick veneer edge banding refers to all edge banding that is 1mm-2mm-3mm thick. This is a layered product with a uniform colour on the interior layers but is not usually made of the same wood as the surface veneer. This is the only method to make the product flexible enough to wrap up and send. Apply manually with contact cement and other adhesives, or automatically with edge banding machines.

It does not come with adhesive. The product may retain some “memory” from its rolled state, but it will straighten sufficiently to be used. Makes a lovely edge that is frequently preferred over thin Veneer Edge Band, which is.020′′ or 1/2 mm thick and also available in another subcategory.

Free Sample

We manufacture sample boards for many different customers, suitable for a range of different melamine sheet,hpl panel,uv board,fancy plywood,marine plywood,RV plywood,particle board,mdf board etc.

Typically 18mm thick 200mmx200mm plywood or particle board is used, but can be manufactured in any thickness or material requested.We can also help you design sample plates, or sample plate displays.

Lend time: Delivery time about 7-20 days.

Tons of possibilities including:
* Custom melamine Colors
* Custom size
* Custom Lamination
* Custom Veneers available
* Finished or treated edges
* Custom logo(acceptance of agency)
* Custom Decals

All sample boards are CNC manufactured to ensure quality.

We are growing our range each and every day so please do get in touch if you can’t find what you are looking for.Contact us for volume discounts

Get a inquiry

You can order samples of the designs you like so you can see them, feel them and test them for yourself before making your order. If you decide to order your front through us,the samples you get are free of charge, only bear the cost of sample delivery.

The message has been submitted successfully!

There has been some error while submitting the form. Please verify all form fields again.Or contact us directly at pintree@plywoodnest.com

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.